Managed by the FaxBack Support Team
How to make a PRI recording on a Mediant or TrunkPack:

In order to follow these instructions you must have Wireshark installed on a machine.

First enable trunk tracing. Go to http://gateway/FAE, and navigate to “Trunk Traces”. Set the trace level on the trunks we're interested in to acFULL_TRACE.

Still on http://gateway/FAE, navigate to “Cmd Shell.”

Enter the following commands (the alternative way of entering the commands is telnet – you will be able to copy several commands at a time and not one by one; just telnet to the gateway with Admin/Admin and you will get the command shell):

adv
dr
 
ait <ip of machine running wireshark>
aipct n2h SIP
apst ISDN
aiptt n2h a a a a a
aiptt h2n a a a a a
anct all-with-pcm 1 dynamic
ar
adsptr h2d dsp a a
adsptr d2h dsp a a
adsptr d2n rtp a a
adsptr n2d rtp a a

Review the rules you have entered by typing
..
ltr

You should see:

0) SystemTrace tracePt-System, packet type-SIP -> IP(C5): 192.168.20.171:925
1) SystemTrace tracePt-System, packet type-NetBricks(ISDN/SS7) -> IP(C5): 192.168.20.171:925
2) IPTrace tracePt-Net2Host, ALL, SRC ALL:ALL, DST ALL:ALL-> IP(C5): 192.168.20.171:925
3) IPTrace tracePt-Host2Net, ALL, SRC ALL:ALL, DST ALL:ALL-> IP(C5): 192.168.20.171:925
4) NextCallTrace tracePt-All-Media, packet type-All-Media-With-PCM, Total Calls:10 Recorded source IDs: -> IP(C5): 192.168.20.171:925
5) DSPTrace tracePt-Host2Dsp, packet type-DSP, Core-ALL, Channel-ALL -> IP(C5): 192.168.20.171:925
6) DSPTrace tracePt-Dsp2Host, packet type-DSP, Core-ALL, Channel-ALL -> IP(C5): 192.168.20.171:925
7) DSPTrace tracePt-Dsp2Net, packet type-RTP, Core-ALL, Channel-ALL -> IP(C5): 192.168.20.171:925
8) DSPTrace tracePt-Net2Dsp, packet type-RTP, Core-ALL, Channel-ALL -> IP(C5): 192.168.20.171:925

Start Wireshark capture.

Go back to the “Cmd Shell” and enter
start

Make several fax calls


When done on enter the following on the “Cmd Shell”
stop

Save and upload pcap.

Copyright © FaxBack, Inc.