Managed by the FaxBack Support Team
This article applies to NET SatisFAXtion 8.5.

Autoprinting by Port


  • From the Administration program go to the User Administration view.
  • Create a new group and name it something of your choice.
  • Select the Routing Tab, then select the port you wish to use for this group. Note a blue check mark will appear on that port (See figure 1)
  • Click the Autoprint button and select a printer for letter and legal. If no printers are available, cancel and go connect to the printers you require.
  • Click on the Settings tab and select either First Page or Entire Message Body on the Inbound messages section. Click OK
  • Click OK to complete the Group changes.
  • Right click on the new group and select Add/Remove Members. Add a dummy user to this group, as Group Autoprint will print one copy for each user in this group. Multiple users will equal multiple copies printed.

This port is now setup to print every inbound fax on the printer you specified.

Figure 1 Select a Line to route on:
Administration_Modify_Group_Select_Line_for_Autoprint.gif

Figure 2 Select the proper printer(s) and what part of the document you wish to print
Administration_Select_Printer_for_Autoprint.gif

Copyright © FaxBack, Inc.